Open-SmartWatch
The Open-SmartWatch is an open source project created by "Paul's 3D Things". It consists of hardware modules, 3D printable cases, and a custom operating system to build smartwatches with the goal that they can be assembled, repaired, and modified by everyone.
Makerfabs is authorized to produce the latest version of Open- SmartWatch by the designer.
It will include:
- Open- SmartWatch PCBA board
- 3D-printing Case
- Lipo Battery
- Standard Strap
There would be further GPS edition, keep an eye on Makerfabs Youtube or Twitter.
Specification:
(***Please note that a standard strap will be used in the current version, but not 3D printed strap as the video, still in optimization of the design& manufacturability of the 3D printed strap***)
Useful Links
GC9A01 1.28 Inch Round LCD Module
This tiny 240x240 1.28 inch TFT color LCD, with GC9A01. The breakout board communicates to main co..
$8.90
Pico Starter Kit for Raspberry PI
The Raspberry Pi Pico is a low-cost, high-performance microcontroller board with flexible digita..
$31.80
Open Wind Station GPRS/ MQTT
Update: In the past 3 months, we made a weather station and recorded the weather data in Shenz..
$45.80
DIY ESP32 SmartClock Kit with Weather Forecasting
This is a soldering kit for the starters to learn soldering. After 1~2 hours soldering and as..
$24.90
MaTouch_ESP32-S3 Round SPI TFT with Touch 1.28"
The ESP32-S3 round display with touch can be a great tool for your applications such as smartwatch..
$29.80