NEW ESP32 WiFi+BT/BLE Module of Ai-thinker | Makerfabs

Posted by Sammaker 29/10/2018 0 Comment(s)


1、ESP32-S  WiFi+BLE  Module


The ESP32-S Wi-Fi+BT SoC Module: https://www.makerfabs.com/esp32-s-wi-fi-bt-soc-module.html is a small802.11b/g/n Wi-Fi BT SoC Module. It features:


● Low power 32-bit CPU,can also serve the application processor
● 802.11b/g/n Wi-Fi and BLE
● Up to 160MHz clock speed

2、ESP32S+ Camera Solution

If you need some camera functional in your IOT project, this ESP32S-CAM : https://www.makerfabs.com/esp32-cam-development-board-with-camera.html board may be a suitable solution. Based on the ESP32S module, it integrate the OV2640 camera module and TF card, to make this board ready for your camera. It features:

● JPEG( OV2640 support only ),BMP,GRAYSCALE
● 802.11b: 17±2 dBm (@11Mbps); 802.11g: 14±2 dBm (@54Mbps); 802.11n: 13±2 dBm (@MCS7)

3ESP32-A1S  Audio Solution

If not only Wi-Fi/BLE needed, but also audio service, the ESP32-A1S :  https://www.makerfabs.com/esp32-a1s-wi-fi-bt-soc-audio-module.html would be help. Besides the basic Wi-Fi/BLE function, this module is internally equipped with 4M PSRAM and CodeC audio processing chip, which can be widely used for IoT. It features:

● Base on ESP32-S  WiFi+BT/BLE  SoC;
● Built-in AC101 Codec audio decoding chip, can support playing music and recording
● Supports a variety of mainstream compression and lossless audio formats, including M4A, AAC, FLAC, OGG, OPUS, MP3, WAV, etc.
● Supports audio input methods such as MIC and Line-in.

The ESP32-A1S Wi-Fi+BT Audio Development Kithttps://www.makerfabs.com/esp32-a1s-wi-fi-bt-audio-development-kit.html a good start board to learn the ESP32-A1S  Audio Module, it Supports TF card, LINEIN and 2-way Mic input; support 1 channel headphone output and 1 chanel left and right speaker output, facilitate rapid developmentContact Makerfabs for free samples of AI-think IOT solutions.

Leave a Comment