Difference between revisions of "Maduino Zero Ethernet"

From MakerFabsWiki
Jump to: navigation, search
(Created page with " == FAQ == You can list you question here or contact with '''support@makerfabs.com''' for technology support. A detailed descriptions of your question will be helped to solve...")
 
Line 1: Line 1:
 +
== Introduction ==
 +
Maduino Zero Ethernet.<br>
 +
 +
== Features ==
 +
☉ATMEL SAMD21G18A: 32-bit ARM® Cortex®-M0 up to 48MHz, 256KB flash, 32KB SRAM, LQFP48<br>
 +
☉Powered by lithium battery(3.4-4.2V) or USB cable<br>
 +
☉NXP PN532,Near Field Communication (NFC) controller, 13.56Mhz Antenna<br>
 +
☉When power outage the battery will continue work<br>
 +
☉Interface: I2C/SPI/UART/ADC/DAC/I2S/38*GPIO<br>
 +
☉Arduino Compatible: You can play it with Arduino IDE<br>
 +
☉More cost-effective and high quality than Arduino Zero<br>
 +
☉Working Temperature: -20 ~ +85℃<br>
 +
☉Default baud rate: 115200bps<br>
 +
☉Size: 40*55mm<br>
 +
  
 
== FAQ  ==
 
== FAQ  ==

Revision as of 03:12, 25 November 2019

Introduction

Maduino Zero Ethernet.

Features

☉ATMEL SAMD21G18A: 32-bit ARM® Cortex®-M0 up to 48MHz, 256KB flash, 32KB SRAM, LQFP48
☉Powered by lithium battery(3.4-4.2V) or USB cable
☉NXP PN532,Near Field Communication (NFC) controller, 13.56Mhz Antenna
☉When power outage the battery will continue work
☉Interface: I2C/SPI/UART/ADC/DAC/I2S/38*GPIO
☉Arduino Compatible: You can play it with Arduino IDE
☉More cost-effective and high quality than Arduino Zero
☉Working Temperature: -20 ~ +85℃
☉Default baud rate: 115200bps
☉Size: 40*55mm


FAQ

You can list you question here or contact with support@makerfabs.com for technology support. A detailed descriptions of your question will be helped to solve your question.

Resources