Maduino Zero Ethernet

From MakerFabsWiki
Revision as of 03:12, 25 November 2019 by Charlin (talk | contribs)

Jump to: navigation, search

Introduction

Maduino Zero Ethernet.

Features

☉ATMEL SAMD21G18A: 32-bit ARM® Cortex®-M0 up to 48MHz, 256KB flash, 32KB SRAM, LQFP48
☉Powered by lithium battery(3.4-4.2V) or USB cable
☉NXP PN532,Near Field Communication (NFC) controller, 13.56Mhz Antenna
☉When power outage the battery will continue work
☉Interface: I2C/SPI/UART/ADC/DAC/I2S/38*GPIO
☉Arduino Compatible: You can play it with Arduino IDE
☉More cost-effective and high quality than Arduino Zero
☉Working Temperature: -20 ~ +85℃
☉Default baud rate: 115200bps
☉Size: 40*55mm


FAQ

You can list you question here or contact with support@makerfabs.com for technology support. A detailed descriptions of your question will be helped to solve your question.

Resources