This 6" (15 cm), 10-conductor ribbon cable has a female 2×5 IDC connector on each end that is designed to plug into a 0.05" (1.27 mm) 2×5 shrouded box header.
This cable is handy when programming or debugging a tiny board that uses 10-pin 1.27mm (0.05") pitch SWD programming connectors. We see these connectors often on ARM Cortex dev kits and have a few handy in our ARM-dev box. We thought you may want a backup cable as well, so now they are in the Makerfabs shop!
One cable per order. The ribbon cable is 0.06mm/0.025" pitch and the connector is a 1.27mm (0.05") pitch 2x5 box. These are not for use with programming most AVRs or other large devices that have 0.1" pitch connectors so be aware of which you need!