< img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=863309895111403&ev=PageView&noscript=1" />
Holiday Notice: Makerfabs will be on holiday from 19th - 27th January 2023 (GTM+8) to celebrate the Chinese Spring Festival. Orders after 19th Jan will proceed on 28th Jan. Happy New Year and thank you for your understanding.

ESP32-S3 Parallel TFT with Touch 4.3"

New ESP32-S3 Parallel TFT with Touch 4.3"

This ESP32 4.3 inch IPS display could be an ideal displayer& controller for IoT applications. Its high lightness IPS display with a resolution of 800*480 makes the display effect beautiful, together with 5 points capacitive touch, great for applications such as home automation; There onboard SD card and RTC, to make it possible to record/play filed data. Also, there 2 Mabee/ Grove connectors, so the users can connect kinds of sensors to this board, to create personal prototype projects instantly.

The ESP32-S3 has WiFi& Bluetooth 5.0, and 8M PSRAM ESP32-S3 is used in this product, with 16M flash, to make it competent for more advanced applications.

ESP32-S3 Parallel TFT Comparison: 3.5" VS 4.3"

Item 3.5" 4.3"
MCU ESP32-S3-WROOM-1-N16R2 ESP32-S3-WROOM-1-N16R8
Flash 16MB 16MB
PSRAM 2MB 8MB
Dual USB YES YES
LCD Size 3.5" 4.3"
LCD Driver ILI9488 Unknown, similar to ST7282
Interface MCU8080 16bit(I80) RGB565
Resolution 480*320 800*480
Touch Panel Driver FT6232 GT911
MicroSD YES YES
Local RTC NO YES
Mabee interface 1*I2C; 1*GPIO 1*I2C; 1*GPIO
Button Reset*1; Boot*1 Reset*1; Boot*1

Features:

  • Controller: ESP32-S3-WROOM-1, PCB Antenna, 16MB Flash, 8MB PSRAM, ESP32-S3-WROOM-1-N16R8
  • On Board RTC
  • Wireless: Wifi& Bluetooth 5.0
  • LCD: 4.3 inch High Lightness IPS
  • FPS: >30
  • Resolution: 800*480
  • LCD interface: RGB 565
  • Touch Panel: 5 Points Touch, Capacitive
  • Touch Panel Driver: GT911
  • USB: Dual USB Type-C(one for USB-to-UART and one for native USB)
  • USB to UART Chip: CP2104
  • Power Supply: USB Type-C 5.0V(4.0V~5.25V)
  • Button: Flash button and reset button
  • Mabee interface: 1*I2C;1*GPIO
  • MicroSD: Yes
  • Arduino support: Yes
  • Type-C Power Delivery: Not Supported
  • Operation temperature: -40℃ to +85℃
  • Reference:

  • Wiki
  • GitHub
  • ESP32-S3 datasheet
  • Write a review
    Note: HTML is not translated!
        Bad           Good

    Captcha
    • Views: 4705
    • Brand: Makerfabs
    • Product Code: E32S3RGB43
    • Availability: In Stock
    • $36.90