MaTouch ESP32-P4 TFT with Touch 7" MIPI
This MaTouch 7” board is based on the ESPRESSIF New ESP32P4 controller, which is based on RISC-V, plus a ESP32 C6 module for WIFI/Bluetooth. With 7 inch 1024*600 capacitive Touch/ 2 Million Pixels Camera / microphone / Speaker integrated, making this product a good candidate for multimedia development based on ESP32 solutions.
ESP32P4 packs two RISC-V cores running at up to 400MHz with 32MB of pseudo-static RAM (PSRAM) and 16MB of flash storage, providing not only an impressive amount of CPU performance but hardware acceleration for image encoding and decoding. The two-lane MIPI CSI and DSI ports on the board is target the device at human-machine interaction projects.
Different with other alike/clone products on the market, Makerfabs provide this product integrated so you can directly begin the multimedia development, with SD card/speaker/ MIPI cameral and simple case all integrated. Of course we also provide simple demos/all open hardware/firmware (ESP-IDF), for users to begin the works, include:
- Basic display/Touch usage Demo;
- Camera usage;
- Audio Recording/ Play;
- Internet connection with Ethernet/WIFI;
- SD card storage/ reading;
- Native USB;
Spec:
- Controller: ESP32-P4NRW32, 16MB Flash, 32MB PSRAM
- Wireless: ESP32-C6FH4 , 2.4GHz Wi-Fi 6 (802.11ax)，Bluetooth® 5 (LE)(ESP32-C6FH4)
- LCD: MIPI, JD9165, 7", 1024x600 resolution
- Touch Panel: 5 Points Touch, GT911, Capacitive
- USB: 1 * USB to UART, 1 * USB_NATIVE, 1 * USB_CDC/JTAG, 1 * USB_OTG, 1 * USB_DEVICE,
- Power Supply: USB Type-C 5.0V(4.0V~5.25V)/ Lipo Battery 3.7V
- Button: Flash button and reset button
- Camera Maximum Resolution: SC2336 ,2 Million Pixels, 1920H×1080V, MIPI
- Ethernet: IP101GRI
- Microphone input: WMM7037AT2-4/TR
- Audio output: ES8311, 4ohm 3W Speaker
- MicroSD: 32G
- On Board Charger: Yes
- Expansion interface: 26 * GPIO
- Demos Development: ESP-IDF
- LVGL support: Yes
Useful Links:
